Solvothermal synthesis of transition metal (iron/copper) and nitrogen co−doped carbon nanomaterials: comparing their peroxidase−like properties

Journal of Nanoparticle Research - Polycrystalline metallic copper nanoparticle samples with the average particle sizes ranging from 53 to 80 nm were controllably prepared by the wet...     

Convergence of the viscosity solution of non-autonomous Hamilton-Jacobi equations

In this paper,we investigate the non-autonomous Hamilton-Jacobi equation ■ where H is 1-periodic with respect to t and M is a compact Riemannian manifold without boundary.We obtain the viscosity solution denoted by T_(t_0)~tφ(x) and show T_(t_0)~tφ(x) converges uniformly to a time-periodic viscosity solution u~*(x,t) of ?_tu+H(t,x,?_xu,u)=0.     

A novel PCR-based technology for rapid and non-sequencing authentication of Bombyx batryticatus using species-specific primers

A novel PCR technology was developed to detect short DNA fragments using species-specific primers for rapid and non-sequencing authentication of Bombyx batryticatus based on differences in the mitochondrial genome. Three specifically designed primer reactions were established to target species for the reliable identification of their commercial products. They were confirmed to have a high inter-species specificity and intra-species stability. The limit of detection was estimated as 1 ng of genomes for Beauveria bassiana and 100 pg for Bombyx mori and Metarhizium anisopliae. Furthermore, validation results demonstrated that raw materials and their processed products can be conveniently authenticated with good sensitivity and precision using this newly proposed approach. In particular, when counterfeits were assayed, these primer sets performed well, whereas COI barcoding technology did not. These could also assist in the discrimination and identification of adulterates of other animal-derived medicines in their pulverized and processed forms and even in complexes.     

Effect of the Reaction Temperature on the Removal of Diesel Particulate Matter by Ozone Injection

This study seeks to investigate the removal efficiency of particulate matter (PM) from the actual diesel exhaust at various reaction temperatures by using non-thermal plasma (NTP). The effect of the reaction temperature on removal efficiency was reflected by the change in the concentration of particles in different modes and the weight fraction of volatile organics in PM. The Arrhenius equation was used to determine the apparent activation energies E_a of the soot in PM. In addition, the difference in the oxidation reaction at various reaction temperatures and the effect of NTP on the properties of PM were discussed. After considering the decreasing ranges of the total concentration and the weight of the PM, it was determined that 120 °C is the optimal temperature choice for PM removal. The decreasing range of the total concentration reached 57.13% and 66.79% of PM was removed when the PM is measured by weight. NTP has better effect on the removal of smaller particles. The weight fraction of the volatile fraction markedly decreases after the reaction and the apparent activation energy of soot noticeably decreased. The oxidizability of the excited species in NTP was enhanced with the increase of the reaction temperature. However, the excited species concentration declined concurrently, resulting in the occurrence of the optimized range of reaction temperature. The particles were removed by the oxidation that occurred on the surface of the primary particle and the disintegration of the structure of the particles.

     

Dynamics modeling and robotic-assist,leader-follower control of tractor convoys

This paper proposes a generalized dynamics model and a leader-follower control architecture for skid-steered tracked vehicles towing polar sleds. The model couples existing formulations in the literature for the powertrain components with the vehicle-terrain interaction to capture the salient features of terrain trafficability and predict the vehicles response. This coupling is essential for making realistic predictions of the vehicles traversing capabilities due to the power-load relationship at the engine output. The objective of the model is to capture adequate fidelity of the powertrain and off-road vehicle dynamics while minimizing the computational cost for model based design of leader-follower control algorithms. The leader-follower control architecture presented proposes maintaining a flexible formation by using a look-ahead technique along with a way point following strategy. Results simulate one leader-follower tractor pair where the leader is forced to take an abrupt turn and experiences large oscillations of its drawbar arm indicating potential payload instability. However, the follower tractor maintains the flexible formation but keeps its payload stable. This highlights the robustness of the proposed approach where the follower vehicle can reject errors in human leader driving.     

Lamb波频域逆散射全聚焦成像方法研究

Lamb波因其传播距离远、衰减小常被用于板状结构的无损检测中,在基于Lamb波损伤检测的诸多成像技术中,全聚焦方法(Total Focus Method,TFM)方法因其成像分辨率高、信噪比高而受青睐。然而Lamb波的频散效应导致时域延时量不能被准确计算,进而影响传统TFM方法对损伤定位及成像的精度;此外,既有的TFM方法仅以回波幅值作为成像指标,忽略了Lamb波与损伤的相互作用,故而不能通过损伤表面的物理参数增强成像质量。针对这两个问题,本文首先在时域TFM基础上发展了频域TFM,在计算中纳入频散关系以规避频散的影响;其次以包含明确的损伤特征参数--反射率为成像指标,结合频域TFM方法建立损伤逆散射模型,以实现对损伤的准确成像。仿真和实验结果表明:频域逆散射TFM成像方法能够实现对铝板结构中的损伤检测,在工程实践中具有应用价值。     

Composite chattering-free discrete-time sliding mode controller design for active front steering system of electric vehicles

Nonlinear Dynamics - In order to reduce the adverse effects of internal uncertainty and external disturbance in the active front steering (AFS) system of electric vehicles, two chattering-free...     

近红外光谱结合共识模型快速检测果酒的总酚含量

果酒发酵中的多酚是引起果酒口感、颜色变化的重要因素。为保证果酒品质,有必要开发一种快速监测发酵过程中多酚含量变化的技术。收集不同批次成熟期的蓝莓、桑葚为原料,分别碾压成汁,同时按比例混合二者,于小型发酵罐进行发酵。通过离线收集不同发酵时段的发酵液于离心管,高速离心后取上清液置于棕色瓶保存,共计得到48个果酒发酵样本。将上清液置于三个平行样比色皿,以傅里叶快速变换近红外光谱仪(FT-NIR)采集其透射光谱,取平均值作为该样本的光谱信号。然后将棕色瓶内的发酵液以国标法(即以标准液的吸光度值制定标准曲线)测定各样品的总酚含量,以duplex法计算样本光谱之间的距离且按2∶1的比例划分为训练集和预测集。采用间隔偏最小二乘法(iPLS)将训练集样本的透射光谱与总酚含量之间构建定量模型,间隔数从2依次变化到60个。该研究创新之处是使用共识方法融合多个已构建好的iPLS成员模型,按一定的共识规则分配权系数。通过各成员模型交互验证的残差及其残差之间的相关性来优化各成员模型的线性组合,以拉格朗日乘数法求解各成员模型的权系数,使间隔偏最小二乘-共识模型(consensual iPLS,CiPLS)的交互验证均方根误差最小。相比于全局PLS模型、划分不同间隔数量时的iPLS模型,CiPLS均具有较小的预测误差。当划分39个间隔时由三个iPLS成员模型(即14th,16th,18th)组成的共识模型误差最小为124.2,交互验证相关系数为0.944,对预测集样本的预测均方根误差为163.4,预测相关系数为0.931,预测性能均优于PLS和iPLS模型。另外,作为对比选用连续投影算法与无信息变量剔除法来优化光谱模型,其预测性能均不及本文提出的共识模型。分析各iPLS模型预测残差之间的相关性,发现共识模型主要是融合那些具有较高预测性能且模型间较低相关性的成员模型。结果表明,光谱分析结合共识方法可提高回归模型的预测精度、减少建模所需变量数,能够用于果酒总酚含量的离线快速检测。     

Miscanthus stem fragment – Reinforced polypropylene composites: Development of an optimized preparation procedure at small scale and its validation for differentiating genotypes

The production of ligno-cellulosic biomass-based composites requires the development of new methodologies to evaluate the reinforcement potential of a given biomass, such as miscanthus studied in the work. Miscanthus stems from thirteen genotypes were broken into elongated fragments and mixed with polypropylene composites in an internal mixer. The aim is to find the best protocol able to discriminate miscanthus genotypes for their reinforcement capability. The following process parameters were optimized in order to maximize the reinforcement effect of the stem fragment filler: mixing parameters (mixing time, rotor speed and chamber temperature), temperature, fragment content, size and length distributions and coupling agent. The relationship between the process parameters and the mechanical properties of composites were analyzed to evaluate the influence of genotype on reinforcement performance, showing the robustness of the protocol in effectively discriminating genotypes according to their reinforcing capacity.